;=============================================================
; GSD file for AG 626 DP
; Company: 	Max Stegmann GmbH
; Version: 	1.0,  14. Apr. 1998
; Contact person: J. Diskowski, Tel.: 49 (0) 771 807-321
;			        Fax:		    -100                                 	
; Common Product information:
;     - Programmable version
;     - Station type DP-Slave
;     - 2 WORD I/O with consistency
;=============================================================
#Profibus_DP
;
PrmText = 1
Text(0) = "Clockwise"
Text(1) = "Counter clockwise"
EndPrmText
;
PrmText = 2
Text(0) = "Disabled"
Text(1) = "Enabled"
EndPrmText
;
PrmText = 3
Text(0) = "DIP switch"
Text(1) = "EEPROM"
EndPrmText
;
ExtUserPrmData = 1 "Spec_User_Prm_Byte"
Unsigned8 1 0-255
EndExtUserPrmData
;
ExtUserPrmData = 2 "Code sequence"
Bit(0) 0 0-1
Prm_Text_Ref = 1
EndExtUserPrmData
;
ExtUserPrmData = 3 "Class 2 function"
Bit(1) 1 0-1
Prm_Text_Ref = 2
EndExtUserPrmData
;
ExtUserPrmData = 4 "Additional diagnostics"
Bit(2) 0 0-1
Prm_Text_Ref = 2
EndExtUserPrmData
;
ExtUserPrmData = 5 "Scaling function"
Bit(3) 1 0-1
Prm_Text_Ref = 2
EndExtUserPrmData
;
ExtUserPrmData = 6 "Reserved"
BitArea (4-5) 0 0-3
EndExtUserPrmData
;
ExtUserPrmData = 7 "SSA service"
Bit(6) 0 0-1
Prm_Text_Ref = 2
EndExtUserPrmData
;
ExtUserPrmData = 8 "Address source"
Bit(7) 0 0-1
Prm_Text_Ref = 3
EndExtUserPrmData
;
ExtUserPrmData = 9 "Steps per turn (31-16)"
Unsigned16 0 0-0
EndExtUserPrmData
;
ExtUserPrmData = 10 "Steps per turn (15-0)"
Unsigned16 8192 1-8192
EndExtUserPrmData
;
ExtUserPrmData = 11 "Measuring range in steps (31-16)"
Unsigned16 512 0-512
EndExtUserPrmData
;
ExtUserPrmData = 12 "Measuring range in steps (15-0)"
Unsigned16 0 0-65535
EndExtUserPrmData
;
GSD_Revision       = 1
;
Vendor_Name        = "Stegmann"
Model_Name         = "AG 626 DP e"
Revision           = "1.1"
Ident_Number       = 0x5952
OrderNumber         = "AG 626 _KR DP"
Protocol_Ident     = 0
Station_Type       = 0
FMS_supp           = 0
Hardware_Release   = "HW 1.01"
Software_Release   = "SW 1.03"
;
9.6_supp           = 1
19.2_supp          = 1
93.75_supp         = 1
187.5_supp         = 1
500_supp           = 1
1.5M_supp          = 1
3M_supp            = 1
6M_supp            = 1
12M_supp           = 1
;
MaxTsdr_9.6        = 60
MaxTsdr_19.2       = 60
MaxTsdr_93.75      = 60
MaxTsdr_187.5      = 60
MaxTsdr_500        = 100
MaxTsdr_1.5M       = 150
MaxTsdr_3M         = 250
MaxTsdr_6M         = 450
MaxTsdr_12M        = 800
;
Redundancy          = 0
Repeater_Ctrl_Sig   = 2
24V_Pins            = 0
Implementation_Type = "SPC3"
;
Freeze_Mode_supp    = 1
Sync_Mode_supp      = 1
Auto_Baud_supp      = 1
Set_Slave_Add_supp  = 1
Min_Slave_Intervall = 1
;
Modular_Station     = 0
Modul_Offset        = 0
Max_User_Prm_Data_Len = 10
;
Fail_Safe           = 0
Slave_Family        = 7
Max_Diag_Data_Len   = 63
;
Ext_User_Prm_Data_Ref(0) = 1
Ext_User_Prm_Data_Ref(1) = 2
Ext_User_Prm_Data_Ref(1) = 3
Ext_User_Prm_Data_Ref(1) = 4
Ext_User_Prm_Data_Ref(1) = 5
Ext_User_Prm_Data_Ref(1) = 6
Ext_User_Prm_Data_Ref(1) = 7
Ext_User_Prm_Data_Ref(1) = 8
Ext_User_Prm_Data_Ref(2) = 9
Ext_User_Prm_Data_Ref(4) = 10
Ext_User_Prm_Data_Ref(6) = 11
Ext_User_Prm_Data_Ref(8) = 12
;
Module = "2 WORD I/O with consistency" 0xF1
1
EndModule
;