;=============================================================
; GSD File fuer AG 626 DP
;
; Filename:        5952V11G.GSD
; Hardware-Release 1.01
; Software-Release 1.03
;
; Firma:           Max Stegmann GmbH
; GSD-Version: 	   1.1, 14. Apr. 1998
; Ansprechpartner: J. Diskowski, Tel.: 49 (0) 771 807 - 321
;                                Fax:                 - 100
; Allgemeine Produktinformation:
;     - Programmierbare Version
;     - Stationstyp DP-Slave
;     - 2 Worte Ein-/Ausgabedaten mit Konsistenz
;=============================================================
#Profibus_DP
;
PrmText = 1
Text(0) = "Codefolge steigend"
Text(1) = "Codefolge fallend"
EndPrmText
;
PrmText = 2
Text(0) = "deaktiviert"
Text(1) = "aktiviert"
EndPrmText
;
PrmText = 3
Text(0) = "DIP-Schalter"
Text(1) = "EEPROM"
EndPrmText
;
ExtUserPrmData = 1 "Spec_User_Prm_Byte"
Unsigned8 1 0-255
EndExtUserPrmData
;
ExtUserPrmData = 2 "Zaehlrichtung"
Bit(0) 0 0-1
Prm_Text_Ref = 1
EndExtUserPrmData
;
ExtUserPrmData = 3 "Class 2 Funktion"
Bit(1) 1 0-1
Prm_Text_Ref = 2
EndExtUserPrmData
;
ExtUserPrmData = 4 "Zusaetzliche Diagnose"
Bit(2) 0 0-1
Prm_Text_Ref = 2
EndExtUserPrmData
;
ExtUserPrmData = 5 "Skalierungsfunktion"
Bit(3) 1 0-1
Prm_Text_Ref = 2
EndExtUserPrmData
;
ExtUserPrmData = 6 "Reserviert"
BitArea (4-5) 0 0-3
EndExtUserPrmData
;
ExtUserPrmData = 7 "SSA Dienst"
Bit(6) 0 0-1
Prm_Text_Ref = 2
EndExtUserPrmData
;
ExtUserPrmData = 8 "Address-Quelle"
Bit(7) 0 0-1
Prm_Text_Ref = 3
EndExtUserPrmData
;
ExtUserPrmData = 9 "Schritte pro Umdrehung (31-16)"
Unsigned16 0 0-0
EndExtUserPrmData
;
ExtUserPrmData = 10 "Schritte pro Umdrehung (15-0)"
Unsigned16 8192 1-8192
EndExtUserPrmData
;
ExtUserPrmData = 11 "Messbereich in Schritten (31-16)"
Unsigned16 512 0-512
EndExtUserPrmData
;
ExtUserPrmData = 12 "Messbereich in Schritten (15-0)"
Unsigned16 0 0-65535
EndExtUserPrmData
;
GSD_Revision        = 1
;
Vendor_Name         = "Stegmann"
Model_Name          = "AG 626 DP g"
Revision            = "1.1"
Ident_Number        = 0x5952
OrderNumber         = "AG 626 _KR DP"
Protocol_Ident      = 0
Station_Type        = 0
FMS_supp            = 0
Hardware_Release    = "HW 1.01"
Software_Release    = "SW 1.03"
;
9.6_supp            = 1
19.2_supp           = 1
93.75_supp          = 1
187.5_supp          = 1
500_supp            = 1
1.5M_supp           = 1
3M_supp             = 1
6M_supp             = 1
12M_supp            = 1
;
MaxTsdr_9.6         = 60
MaxTsdr_19.2        = 60
MaxTsdr_93.75       = 60
MaxTsdr_187.5       = 60
MaxTsdr_500         = 100
MaxTsdr_1.5M        = 150
MaxTsdr_3M          = 250
MaxTsdr_6M          = 450
MaxTsdr_12M         = 800
;
Redundancy          = 0
Repeater_Ctrl_Sig   = 2
24V_Pins            = 0
Implementation_Type = "SPC3"
;
Freeze_Mode_supp    = 1
Sync_Mode_supp      = 1
Auto_Baud_supp      = 1
Set_Slave_Add_supp  = 1
Min_Slave_Intervall = 1
;
Modular_Station     = 0
Modul_Offset        = 0
Max_User_Prm_Data_Len = 10
;
Fail_Safe           = 0
Slave_Family        = 7
Max_Diag_Data_Len   = 63
;
Ext_User_Prm_Data_Ref(0) = 1
Ext_User_Prm_Data_Ref(1) = 2
Ext_User_Prm_Data_Ref(1) = 3
Ext_User_Prm_Data_Ref(1) = 4
Ext_User_Prm_Data_Ref(1) = 5
Ext_User_Prm_Data_Ref(1) = 6
Ext_User_Prm_Data_Ref(1) = 7
Ext_User_Prm_Data_Ref(1) = 8
Ext_User_Prm_Data_Ref(2) = 9
Ext_User_Prm_Data_Ref(4) = 10
Ext_User_Prm_Data_Ref(6) = 11
Ext_User_Prm_Data_Ref(8) = 12
;
Module = "2 WORD E/A mit Konsistenz" 0xF1
1
EndModule
;